M390S

The M390S ultra high temperature blackbody calibrator is without parallel in its capability to produce very high temperature, high emissivity targets and at the same time stabilize at the required temperature within a few minutes of switch-on. The graphite tube target has a 16mm diameter, optionally 25mm (1.00") aperture and an emissivity of 0.995. Target temperature is sensed by a rapid response Mikron infrared fiber optic thermometer which drives a PID controller to regulate the target temperature precisely to the desired value. Remote set point setting is achieved via an RS422 communication port. All safety features to protect equipment and operator are easily accessible.

The M390S is a two-part Blackbody comprised of a controller section and an emitter section. The capability on the M390S is identical to the equivalent M390 with smaller size and weight due to the separation of controller from the emitter.

 

Heated emitter shape: Closed end tube
 

Emissivity: +0.99

Standard calibration method: pyrometric

Aperture diameter:  16mm (25mm or

Temperature uncertainty:  0.25% of reading +1° C
 

Average warm-up time:  5 min (to 2300° C)

Dimensions [mm] (HxWxD) / Weight:  1710 x 560 x 82 / 182 kg 

Custom Designs: Quotations for custom designs and variations are available.