Innova 1309

Multipoint Sampler - Innova 1309

LumaSense's Innova-1309 can be used in conjunction with the gas monitor's 1412 and 1314 or the Fermentation Monitor 1313 to provide a multi-channel monitoring system. The 1309 greatly increases the monitoring capabilities of the gas monitors by drawing air-samples through tubing from up to 12 different sampling points and delivering the samples to the monitor.

Up to 12 tubes connect each channel on the 1309 to the respective sampling point. The 12 channels converge into one; a three-way valve can then direct the gas sample to the gas monitor for analysis, or vent it to the waste-air outlet for purging the sampling lines. While the gas monitor is measuring the sample, the 1309 will purge the next sample line.

Up to 6 temperature sensors, connected to the 1309, can be positioned at the sampling points to give information about the environment at that point. The temperature-transducer inputs are suitable for use with the Air Temperature Transducer MM 0034. Each transducer can be positioned up to 50 m way from the 1309.

The Application Software 7300 is required, to give full coordination and control of all the sampling and monitoring functions of a monitoring system with a PC, one 1412 or 1314 and one 1309.

The Calibration, Set up and Monitoring Software BZ 6003, included with the 1313, gives full control of a monitoring system with a PC, one 1313 and up to three 1309's.


Uses

• Air sampling in 12 locations
• Used with gas monitor 1412 or 1314 and Fermentation Monitor 1313

Features:

• Full remote-control from a personal computer over the IEEE 488 interface
• 12 sample-input channels
• 6 temperature-transducer inputs