IMPAC 测温仪
IN 5 plus
IN 5-L plus
IN 5-H plus

新型、袖珍型、数字式测温仪。用于测量非金属表面或喷漆、涂层、阳极化处理金属的  -32-900 °C的非接触温度。

IMPAC 测温仪 IN 5 plus
IMPAC 测温仪 IN 5 plus (back open)
IMPAC 测温仪 IN 5 plus (back)
IMPAC 测温仪 IN 5 plus (laser9

主要特点

  • 配备0或4-20 mA模拟输出,RS232或RS485数字接口以及激光靶光瞄准系统
  • 数字线性输出实现高精度
  • 曝光时间可调
  • 外壳小巧

详情

IN 5和IN 5 plus系列测温仪专用于非接触式测量非金属表面及喷漆、涂层或阳极氧化处理金属的温度。

这些仪器的规格有所不同:

IN 5是一款双线制数字式测温仪,采用数字信号处理电子技术,具有高精度、连接简便的特点,只需两根线连接。

除模拟输出外,数字式plus型测温仪还配备了一个数字接口,可连接电脑显示和存储测温数据。此外,还有一个温度子区间可以进行设定,更可用电脑对仪器参数进行远程设置。

IN 5-L plus机型配备了有更好测量视域的光学镜头,用于小目标物体的测量。

IN 5-H plus高速机型具有10毫秒的超快曝光时间,适用于快速测量任务。

为了满足不同的测量需要(测量物体的尺寸、距离等),有多种镜头可供选择。

为了精确瞄准测量物体,plus机型还配备了激光靶光。

典型应用(用于如下材质温度测量):

  • 塑料
  • 液体
  • 橡胶
  • 喷漆部件
  • 纸张
  • 沥青
  • 陶瓷
  • 木材
  • 布料
  • 玻璃
  • 食物
  • 涂层金属

资料

Temperature range:

IN 5 plus and IN 5-H plus:-32 to 900°C (MB 9)

IN 5-L plus: 0 to 900°C (MB 9)

Sub range: The plus instruments are user adjustable with minimum span of 51°C
Spectral Range: 8 to 14 μm
IR Detector: Thermopile
Data handling: Digital
Optics: IN 5 plus and IN 5-H plus: Zinc-Sulfide (ZnS)
IN 5-L plus: Zinc-Selenide (ZnSe)
Power Supply: : 24 V DC (18 to 30 V); nominal, ripple must be less than 0.5 V
Power Consumption: max. 70 mA
Analog Output: 0 to 20 mA or 4 to 20 mA (linear), adjustable
Load: max. 500 Ω at 24 V (max. 200 Ω at 18 V)
Interface: RS232 or RS485 (addressable, half duplex), baud rate 1.2 up to 19.2 kBd, resolution 0,1°C
Isolation: Power supply, analog outputs and digital interfaces are electrically isolated from each other
Parameters

Adjustable on the pyrometer: Emissivity, exposure time.Additionally on plus instruments: switch for selecting the analog output of 0 or 4 to 20 mA, online- / offline switch.

Via interface / PC adjustable and readable (only plus instruments in online mode): Emissivity, exposure time, 0 or 4 to 20 mA analog output, sub temperature range, max./min value storage with different clear times or automatic or external clearing mode, address, baud rate, internal temperature, temperature display in °C or °F, activation of ambient temperature compensation 

Maximum / Minimum value
storage:
Built-in single and double storage. clearing with clear time tclear (0.1 s; 0.25 s; 0.5 s; 1 s; 5 s; 25 s),
external contact or via interface or also automatically with each new item to be measured
Emissivity ε: 0.2 ... 1 adjustable
Exposure Time t90:

IN 5 plus:     0.08 s
IN 5-H plus: 0.01 s
IN 5-L plus:  0.18 s

Adjustable in the pyrometer: 0.5 s; 1 s; 2 s; 5 s,
Adjustable via interface: 0.5 s; 1 s; 2 s; 5 s; 10 s; 30 s

Measurement Uncertainty:

IN 5 Plus

T= -32 to 0°C: 1.5°C (Tamb = 15...30°C); 2°C (Tamb = 0...15 or 30...63°C)

T= 0 to 300°C: 0.6% of reading in °C or 1°C (Tamb= 15...30°C) *; 1% of reading in °C or 1.5°C (Tamb= 0...15 or 30...63°C) *

T= 300 to 900°C: 1% of reading in °C (Tamb= 15...30°C); 1.3 % of reading in °C (Tamb= 0...15 or 30...63°C)

IN 5-H Plus:

T= -32 to 0°C: 3°C (Tamb = 15...30°C); 4°C (Tamb = 0...15 or 30...63°C)

T= 0 to 300°C: 0.6% of reading in °C or 1°C (Tamb= 15...30°C) *; 1% of reading in °C or 2°C (Tamb= 0...15 or 30...63°C) *

T= 300 to 900°C: 1% of reading in °C (Tamb= 15...30°C); 1.3 % of reading in °C (Tamb= 0...15 or 30...63°C)

IN 5-L Plus:

T= 0 to 300°C: 0.6% of reading in °C or 2°C (Tamb= 15...30°C) **; 1% of reading in °C or 3°C (Tamb= 0...15 or 30...63°C) **

T= 300 to 900°C: 1% of reading in °C (Tamb= 15...30°C); 1.5 % of reading in °C (Tamb= 0...15 or 30...63°C)

*) Whichever value is greater. The instrument must be at a const. amb. temp. for min. 15 min. and has to be connected to the power supply

**) Whichever value is greater. The instrument must be at a const. amb. temp. for min. 30 min. and has to be connected to the power supply
 

Repeatability: (ε = 1, t90= 1 s)
 
0.3 % of reading in °C or 0.6 °C
Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 15 minutes in IN 5; IN 5
plus or IN 5-Hplus or 30 minutes in IN 5-Lplus
Noise Equivalent Temperature Difference
(NETD): (ε = 1, Tamb= 23°C)

IN 5 Plus:      

At t90= 80 ms: 0.2°C (at 23°C measuring temperature)

At t90= 1 s: 0.05°C (at 23°C measuring temperature)

IN 5-H Plus: 

At t90= 10 ms: 0.7°C (at 23°C measuring temperature)

At t90= 1 s: 0.1°C (at 23°C measuring temperature)

IN 5-L Plus:  

At t90= 180 ms: 0.3°C (at 23°C measuring temperature)

At t90= 180 ms: 0.2°C (at 300°C measuring temperature)

At t90= 1 s: 0.15°C (at 300°C measuring temperature)

At t90= 1 s: 0.1°C (at 300°C measuring temperature)

Ambient Temperature: 0 to 63°C
 
Sighting: Laser targeting light (max. power level < 1 mW, λ= 630-680 nm, CDRH class II)
Relative humidity: Non condensing conditions
Storage Temperature: -20 to 70°C
Housing: Stainless steel
Weight: 410g
Protection class: IP65 (DIN 40050)
CE-label: According to EU directives about electromagnetic immunity
IMPAC 测温仪 IN 5 plus IN 5-L plus IN 5-H plus
IN 5 plus & IN 5-H plus optics 100 a=100 mm
IN 5 plus & IN 5-H plus optics 300 a=300 mm
IN 5 plus & IN 5-H plus optics 800 a=800 mm
IN 5-L plus optics 300 a=300 mm
IN 5-L plus optics 800 a=800 mm
IN 5-L plus optics 100 a=100 mm

光路显示:

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.