IMPAC 测温仪
IN 510系列

数字式红外测温仪,配有小型传感头,用于测量-40-700°C的非接触温度。

Pyrometer IMPAC IN 510 n View
Pyrometer IMPAC IN 510 Sensor Head View

主要特点

  • 传感头和总线在无冷却的条件下,最高可以承受85-180°C的环境温度
  • 传感头可换,无需重新校正
  • 近焦镜头用于测量小物体
  • 可切换数字接口 RS232 / RS485
  • 与继电器触点隔离
  • 可选模拟输出
  • 通过键盘或接口设置参数

详情

IN 510-N 和IN 510是数字式测温仪,用于非接触式测量非金属或涂层金属物体的温度。IN 510 型号安装有一个发光的LC显示屏,可显示当前测得的温度。所有可用的参数都可在集成键盘上进行设定。IN510-N型号没有显示屏和键盘,可通过接口进行参数设定。

所有测温仪都在出厂时即装配有不锈钢微型传感头,其视域为10:1或2:1,并且根据型号的不同,在无冷却的条件下,最高可以承受85-180°C的环境温度。

资料

Technical Data

 

Temperature Range  -40 to 700 °C 

Sub Range

 

Adjustable; min. range 51 °C;

ex works preadjusted to 0 to 500 °C

Spectral Range 8 to 14 µm
Optics: 10:1 or 2:1

Power supply:

 

10 to 30 V DC, ripple < 0.5 V,

current consumption max. 60 mA

Analog output: Linear current (0/4 to 20 mA), voltage (0 to 5 V) or thermocouple (type J or K)
Output for sensor head temperature: 10 mV/°C 
Load: Max. 700 Ω at 24 V power supply (for current output) (500 Ω / 20 V)
Output impedance: 100 Ω (for thermocouple or voltage output)
Relays contact: Isolated relays contact, 50 V DC, 0.2A; temperature and hysteresis adjustable
Digital interface: switchable RS232/RS485
Emissivity ε: 10 to 120% adjustable in steps of 0.1%
Max. / minimum value storage: Clear time: OFF; 0.1 s; 0.25 s; 0.5 s; 1 s; 5 s; 25 s; extern; auto
Response time t90: 180 ms; switchable: 0.5 s; 1 s; 2 s; 5 s; 10 s or 30 s
Temperature display (only IN 510 and IN 520): LCD, 4 digit, 3 values per second, display illumination permanent
Resolution 1⁄10 °C (1⁄10 °F, 1 °F >1000 °F meas. temp.)

Measurement uncertainty:

(ε=1, t90=1 s; Tamb.=15...30°C)

0 to 700 °C: 0.8% of reading in °C or 1° C *)

0 to -20 °C: 2 °C; -20 to -40 °C: 3 °C

TK: 0.03%/°C or 0.05 °C/°C (25 °C)

With thermocouple output: min. 2.5 °C 

Repeatability 0.5% of reading in °C or 0.5 °C *)

Max. ambient temp. converter:

 

0 to 65 °C

(storage temperature: -20 to 70 °C)

Max. ambient temp. sensor head:

 

0 to 85 °C

(storage temp.: -20 to 85 °C / 180°C)

Relative humidity: 10 to 95%, non condensing

Protection class:

IP20 (IN 510-sensor head 2:1)

Weight: 320 g

Housing:

 

Aluminium (converter)

stainless steel (sensor head)

*) The larger value is valid. The sensor head must be in constant ambient temperature for at least 15 min.

Note: The calibration / adjustment of this pyrometer is carried out in accordance with VDI/VDE 3511, Part 4.4. See http://info.lumasenseinc.com/calibration for more information. 

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.