IMPAC 测温仪
ISR 6 Advanced

固定、数字式比色测温仪,用于非接触式温度测量,测温范围600-3000 °C。

IMPAC 测温仪 ISR 6 Advanced
IMPAC 测温仪 ISR 6 Advanced Front Side View
IMPAC 测温仪 ISR 6 Advanced Front View
IMPAC 测温仪 ISR 6 Advanced Top Side View
IMPAC 测温仪 ISR 6 Advanced Top View
IMPAC 测温仪 ISR 6 Advanced Back Top View
IMPAC 测温仪 ISR 6 Advanced Back View
IMPAC 测温仪 ISR 6 Advanced Laser Back View
IMPAC 测温仪 ISR 6 Advanced Through Lens Sighting View

主要特点

  • 测温范围最广,适用于最为灵活多变的流程
  • 在同类产品中,具有最高的精确度和重复精读性
  • “视窗污染”警报
  • 全数字式机芯,用于温度子区间和采用的模拟输出
  • 超速2毫秒响应时间,用于高动态流程
  • 同类产品中最好的镜头,具有手动聚焦功能
  • 4个数字式LED显示器
  • 坚固耐用的不锈钢传感器,适用于恶劣的环境(IP65/NEMA4)

详情

ISR 6 Advanced是一款数字式、小巧快速双色测温仪,用于非接触式温度测量。采用双色测量法(比色法),其中两个相邻的波长用于确定温度。相对于标准的单色测温仪,这一技术具有以下优点:测量结果在很宽的温度范围内一般不受测量物体本身辐射率的影响,也不受测量视域内灰尘及其他污染物的影响。

通过脏污的视窗进行测量,测量值也会受到一定程度影响,所测量的物体可能小于光斑尺寸。此外,测温仪可切换至单色模式,在接近0.9 μm的光谱范围内可用作传统的测温仪。只需2毫秒的响应时间即可实现快速流程的测量。

ISR 6通过RS485接口与计算机USB插口进行连接,从而使用InfraWin软件调整参数。并可用于整个温度过程的温度显示、数据记录和进一步分析。

典型应用

  • 钢铁制造
  • 金属加工 - 感应过程:淬火、焊接、锻造、铜焊、锡焊等
  • 金属加工 - 贵金属熔融与精炼
  • 金属加工 - 金属线/杆轧机水箱的测量,吐线机&风冷转换机
  • 太阳能行业 – 硅加工:真空熔炉中的多晶硅铸造,CVD反应器(西门子还原法)内的多晶硅生长,拉单晶硅(CZ法)
  • 玻璃行业 - 玻璃球坯的温度测量
  • 水泥行业 - 旋转炉内的炉渣温度

资料

Technical Specifications

Measurement Specifications
Temperature Ranges

(MB 14)    600 to 1400 °C
(MB 18)    700 to 1800 °C 
(MB 25)    800 to 2500 °C                     (MB 30)  1000 to 3000 °C 

Sub Range: Any range adjustable within the temperature range, minimum span 50 °C
Spectral Ranges: Channel 1: 0.9 μm;
Channel 2: 1.05 μm
Resolution: 0.1 °C or 0.2 °F at interface;
< 0.0015% of selected sub range at analog output, min. 0.1°C, 16 bit; 1°C or 1 °F on display
Emissivity ε:

0.050 to 1.000 in steps of 1/1000

(1-color mode)

Transmittance τ: 0.050 to 1.000 in steps of 1/1000 (1-color mode)
Emissivity Slope K: 0.800 to 1.200 in steps of 1/1000 (2-color mode) 
Measurement Uncertainty:
(ε = 1, t90 = 1 s,
TAmb. = 25 °C)
< 1500 °C: 0.3% of reading in °C + 2 °C
> 1500 °C: 0.6% of reading in °C
Repeatability:
(ε = 1, t90 = 1 s,
TAmb. = 25 °C)
0.15% of reading in °C + 1 °C

 

Optical Specifications
Sighting Built-in laser aiming light (max. power level < 1 mW, λ = 630 to 680 nm, CDRH class II) or through-lens sighting
Optics: Manually focusable from rear cover measuring distance a = 210 to 5000 mm
Distance Ratio:

MB 14                           approx. 100 : 1

MB 18                           approx. 190 : 1

MB 25 and MB 30        approx.  350 : 1

Environmental Specificatons
Protection Class: IP 65 IEC 60529 (value in mated condition)
Operating Position: any
Ambient Temperature: 0 to 65°C at housing
Storage Temperature -20 to 80°C
Relative Humidity: Non condensating conditions
Weight: 0.6 kg
Housing: Stainless steel
CE Label: According to EU directives about electromagnetic immunity

Note: MB is a shortcut used for temperature range (in German: Messbereich)

Interface  
Connection: 12-pin connector
Display (in rear cover): LED, 4 digit matrix, 5 mm high for 2-color or 1-color temperature signal or measuring distance
Parameters: Adjustable via interface:
2-color / 1-color temperature signal, accordingly emissivity slope or emissivity, temperature sub range, settings for maximum value storage, address, baud rate, switch off limit, "dirty window" warning, transmittance, response time t90, 0 to 20 mA or 4 to 20 mA analog output range, °C / °F
Readable via interface: measured value, internal temperature of the unit, measuring distance
Communication  
Analog Output: Adjustable 0 to 20 mA or 4 to
20 mA, linear (via digital interface)
Digital Interface:

RS485 addressable (half-duplex)
Baud rate: 1200 Bd to 115.2 kBd
(on request RS232 (not addressable)

Switch Off Limit: 2% to 50% (adjustable via interface)
"Dirty Window" Warning:  Relay contact, max. continuous current 0.4 A, setting of the warning level: 0 (off) to 99%
Response Time t90: 2 ms (with dynamic adaption at low signal levels); adjustable to 0.01 s; 0.05 s; 0.25 s; 1 s; 3 s; 10 s
Maximum Value Storage: Built-in single or double storage. Clearing with adjusted time tclear (off; 0.01s; 0.05 s; 0.25 s; 1 s; 5 s; 25 s), via interface, automatically with the next measuring object, external contact, hold-function

 

Electrical  
Power Supply: 24 V DC ± 25%, ripple must be less than 50 mV
Power Consumption: Max. 3 W ( incl. laser)
Load (analog output): 0 to 500 Ω
Isolation: Power supply, analog output and digital interface are galvanically isolated from each other
IMPAC 测温仪 ISR 6 Advanced
MB 14: Focusable Optic a=210 ...5000 mm
MB 18: Focusable Optic a=210 ...5000 mm
MB 25: Focusable Optic a=210 ...5000 mm
MB 30: Focusable Optic a=210 ...5000 mm

光路显示:

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.