DA 6000-N

IMPAC DA 6000-N LED digital display with RS485 interface for stationary digital pyrometers

订货号: 3 890 570

DA 6000-N

Key Features

  • For stationary IMPAC digital pyrometers
  • Temperature display with 5 digit 7-segment LED
  • Mode display with 4 digit alphanumeric LED
  • Everything via digital RS485 interface
  • Fast temperature display
  • Read and change all pyrometer parameters without PC

Details

DA 6000-N is a high-precision LED indicator for IMPAC non-contact temperature measuring devices with excellent additional properties.

Beyond pure indication of measured temperature, you can parametrize a connected IMPAC digital pyrometer via the DA 6000-N completely, without any PC. This is especially interesting for measurement of batches with different properties (e.g. different emissivities or different dimensions). When a new batch starts, you can change the corresponding parameters from the operation desk (e.g. emissivity, response time, reset time of the maximum value storage, measuring subrange).

The digital interface of DA 6000-N version is a RS485 (half-duplex). RS485 is necessary if used with large cable lengths. In this case the digital pyrometer of course has to be equipped with an RS485, too.

资料

温度显示器
5数位7段LED显示器,13毫米,红色
 
菜单显示器
4数位LED矩阵,5毫米,红色
 
测温范围
-100.0°C-3200°C (-148.0°F-5792°F)
 
电源
85-265 V交流电,48-62赫兹或18-30 V直流电,波动最大为0.5 Vpp
 
功率消耗

约7 VA(未连接外部设备)
 
测温仪接口
电流隔离,RS485半双工,波特率为1.2-38.4 kBd 用于与一台数字式测温仪进行通讯
 
操作环境温度
外壳耐温范围为0-50°C
 
存储温度
-20-70°C
 
重量
约350g
 
防护等级
前面板IP 40,其他区域IP 20 (DIN 40 050)
 
显示器分辨率
温度值999.9°C以下,0.1°C;温度值999.9°C以上, 1°C(温度值1831.8°F以下,0.2°F,温度值1831.8°F以上,1°F)
 
外壳
塑料外壳(阻燃剂为改性聚苯醚)尺寸为48 x 96 x 141 mm (DIN 43 700),前面板用螺纹夹固定
 
前面板裁切尺寸
45+0,6 x 92+0,8 mm
 
安装所需深度
165mm带固定夹与电线
 
连接件类型
插入式固定夹,箝位区域0.13-2.5 mm2 (美国线规AWG 28-16) 带导体和导管0.5-1.5 mm2
 
测温速度
测温速度取决于波特率,如波特率为19.2 kBd的条件下,速度为50毫秒
显示刷新时间:300毫秒或温度值变化>5°C时即时刷新(参照测温速度)
可切换°C/°F(仅限于显示器装置,不适用于测温仪)
菜单根据所连接测温仪的类型与操作模式不同而有所区别

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.