IMPAC 测温仪
IN 5/5 plus
IN 5/5-L plus
IN 5/5-H plus

数字式、精确、袖珍型测温仪,用于测量玻璃和石英玻璃表面的温度。温度范围:100-2500 °C

IMPAC 测温仪 IN 5/5 plus

主要特点

  • 配备0或4-20 mA模拟输出,RS232或RS485数字接口以及激光靶光瞄准系统
  • 数字线性输出实现高精度
  • 光斑尺寸小,最小为1.1毫米
  • 曝光时间可调
  • 外壳小巧

详情

IN 5/5测温仪以及IN 5/5 plus系列仪器专用于非接触式测量玻璃表面和石英表面的温度。

这些仪器的规格有所不同:

IN 5/5是一款双线制数字式测温仪,采用数字信号处理电子技术,具有高精度、连接简便的特点,只需两根线连接。

除模拟输出外,数字式plus型测温仪还配备了一个数字接口,可连接电脑显示和存储测温数据。此外,还有一个温度子区间可以进行设定,更可用电脑对仪器参数进行远程设置。

IN 5-L plus机型配备了有更好测量视域的光学镜头,用于小目标物体的测量。

IN 5-H plus高速机型具有10毫秒的超快曝光时间,适用于快速测量任务。

为了满足不同的测量需要(测量物体的尺寸、距离等),有多种镜头可供选择。

为了精确瞄准测量物体,大部分的plus机型还配备了激光靶光。

典型应用(用于如下材质温度测量):

  • 浮法玻璃
  • 中空玻璃
  • 玻璃滴
  • 玻璃钢化
  • 玻璃热弯
  • 灯泡生产
  • 热处理

资料

Temperature range:

IN 5/5 plus:

100 to 1300°C (MB 13)

400 to 2500°C (MB 25)

IN 5/5-H plus; IN 5/5-Lplus: 

200 to 1300°C (MB 13)

400 to 2500°C (MB 25)

IN 5/4plus: 

300 to 1300°C (MB 13)

500 to 2500°C (MB 25)

Sub range: The plus instruments are user adjustable with minimum span of 51°C
Spectral Range:

IN 5/5plus; IN 5/5-Hplus; IN 5/5-Lplus : 5.14 μm

IN 5/4plus 3.9 μm

IR Detector: Thermopile
Data handling: Digital
Optics: Zinc-Sulfide lens (ZnS)
Power Supply: : 24 V DC (18 to 30 V); nominal, ripple must be less than 0.5 V
Power Consumption: max. 70 mA
Analog Output: 0 to 20 mA or 4 to 20 mA (linear), adjustable
Load: max. 500 Ω at 24 V (max. 200 Ω at 18 V)
Interface: RS232 or RS485 (addressable, half duplex), baud rate 1.2 up to 19.2 kBd, resolution 0,1°C
Isolation: Power supply, analog outputs and digital interfaces are electrically isolated from each other
Parameters Adjustable on the pyrometer: Emissivity, exposure time. Additionally on plus instruments: analog output to 0 or 4 to 20 mA, online- / offline switch.
Via interface / PC adjustable and readable (only plus instruments in online mode): Emissivity, exposure time, 0 or 4 to 20 mA analog output, sub temperature range, max./min value storage with different clear times or automatic or external clearing mode, address, baud rate, internal temperature, display in °C or °F, activation of ambient temperature compensation
Maximum / Minimum value
storage (plus instruments):
Built-in single and double storage. clearing with clear time tclear (0.1 s; 0.25 s; 0.5 s; 1 s; 5 s; 25 s),
external contact or via interface or also automatically with each new item to be measured
Emissivity ε: 0.2 to 1 adjustable

Exposure Time t90:

 

IN 5/5plus: 0.08 s

IN 5/5-Hplus: 0.01 s

IN 5/5-Lplus: 0.18 s

Adjustable in the pyrometer: 0.5 s; 1 s; 2 s; 5 s,

Adjustable via interface: 0.5 s; 1 s; 2 s; 5 s; 10 s; 30 s

Measurement uncertainty:
Dependent on object temperature T and
ambient temperature Tamb
(ε= 1, t90= 1 s)

T < 1300°C:

0.6% (IN 5/5-Lplus: 0.8%) of reading in °C or 2°C (Tamb=15 to 30°C) *) 

1% of reading in °C or 1.5°C (Tamb=0 to 15 or 30 to 63°C) *)

T=1300 to 1800°C: 

0.8% of reading in °C (Tamb=15 to 30°C)

1.2% of reading in °C (Tamb=0 to 15 or 30 to 63°C)

T=1800 to 2500°C: 

1% of reading in °C (Tamb=15 to 30°C)

1.4 % of reading in °C (Tamb=0 to 15 or 30 to 63°C)
*)Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 15 minutes(30 min for IN 5/5-Lplus for 200 to 1300°C at Tamb = 0 to 15 or 30 to 63°C) and has to be connected to the power supply.

Repeatability: (ε = 1, t90= 1 s)
 
0.3 % of reading in °C or 0.6 °C
Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 15 min. (30 min for IN 5/5-L
plus for 200...1300°C at Tamb= 0 to 15 or 30 to 63°C
Noise Equivalent Temperature Difference
(NETD): (ε = 1, Tamb= 23°C)

IN 5/5Plus:

At t90= 80 ms: 0.7°C (at 110°C measuring temperature)

At t90= 1 s: 0.4°C (at 110°C measuring temperature)

IN 5/5-HPlus:

At t90= 10 ms: 0.5°C (at 500°C measuring temperature)

At t90= 10 ms: 0.3°C (at 1100°C measuring temperature)

IN 5/5-LPlus: 

At t90= 80 ms: 1.5°C (at 300°C measuring temperature)

At t90= 80 ms: 0.6°C (at 500°C measuring temperature)

At t90= 1 s: 0.4°C (at 300°C measuring temperature)

At t90= 1 s: 0.2°C (at 500°C measuring temperature)

IN 5/4Plus:

At t90= 80 ms: 0.6°C (at 500°C measuring temperature)

At t90= 80 ms: 0.2°C (at 1100°C measuring temperature)

Ambient Temperature: 0 to 63°C; IN 5/5 plus MB 25: 0 to 60°C
Sighting: Laser targeting light (max. power level < 1 mW, λ= 630-680 nm, CDRH class II)
Storage Temperature: -20 to 70°C
Housing: Stainless steel
Weight: 410g
Protection class: IP65 (DIN 40050)
Relative humidity: Non condensing conditions
CE-label: According to EU directives about electromagnetic immunity
IMPAC 测温仪 IN 5/5 plus IN 5/5-L plus IN 5/5-H plus
MB 13 Optics 100 a=100 mm
MB 25 Optics 100 a=100 mm
MB 13 Optics 300 a=300 mm
MB 25 Optics 300 a=300 mm
MB 13 Optik 1200 a=1200 mm
MB 25 Optics 1200 a=1200 mm
IN 5/5-L plus optics 105 a=105 mm
IN 5/5-L plus optics 370 a=370 mm
IN 5/5-L plus optics 800 a=800 mm

光路显示:

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.