IMPAC 测温仪
ISR 6 Advanced

固定、数字式比色测温仪,用于非接触式温度测量,测温范围600-3000 °C。

IMPAC 测温仪 ISR 6 Advanced
IMPAC 测温仪 ISR 6 Advanced Front Side View
IMPAC 测温仪 ISR 6 Advanced Front View
IMPAC 测温仪 ISR 6 Advanced Top Side View
IMPAC 测温仪 ISR 6 Advanced Top View
IMPAC 测温仪 ISR 6 Advanced Back Top View
IMPAC 测温仪 ISR 6 Advanced Back View
IMPAC 测温仪 ISR 6 Advanced Laser Back View
IMPAC 测温仪 ISR 6 Advanced Through Lens Sighting View

主要特点

  • 测温范围最广,适用于最为灵活多变的流程
  • 在同类产品中,具有最高的精确度和重复精读性
  • “视窗污染”警报
  • 全数字式机芯,用于温度子区间和采用的模拟输出
  • 超速2毫秒响应时间,用于高动态流程
  • 同类产品中最好的镜头,具有手动聚焦功能
  • 4个数字式LED显示器
  • 坚固耐用的不锈钢传感器,适用于恶劣的环境(IP65/NEMA4)

详情

ISR 6 Advanced是一款数字式、小巧快速双色测温仪,用于非接触式温度测量。采用双色测量法(比色法),其中两个相邻的波长用于确定温度。相对于标准的单色测温仪,这一技术具有以下优点:测量结果在很宽的温度范围内一般不受测量物体本身辐射率的影响,也不受测量视域内灰尘及其他污染物的影响。

通过脏污的视窗进行测量,测量值也会受到一定程度影响,所测量的物体可能小于光斑尺寸。此外,测温仪可切换至单色模式,在接近0.9 μm的光谱范围内可用作传统的测温仪。只需2毫秒的响应时间即可实现快速流程的测量。

ISR 6通过RS485接口与计算机USB插口进行连接,从而使用InfraWin软件调整参数。并可用于整个温度过程的温度显示、数据记录和进一步分析。

典型应用

  • 钢铁制造
  • 金属加工 - 感应过程:淬火、焊接、锻造、铜焊、锡焊等
  • 金属加工 - 贵金属熔融与精炼
  • 金属加工 - 金属线/杆轧机水箱的测量,吐线机&风冷转换机
  • 太阳能行业 – 硅加工:真空熔炉中的多晶硅铸造,CVD反应器(西门子还原法)内的多晶硅生长,拉单晶硅(CZ法)
  • 玻璃行业 - 玻璃球坯的温度测量
  • 水泥行业 - 旋转炉内的炉渣温度

资料

Technical Specifications

Measurement Specifications
Temperature Ranges

(MB 14)    600 to 1400 °C
(MB 18)    700 to 1800 °C 
(MB 25)    800 to 2500 °C                     (MB 30)  1000 to 3000 °C 

Sub Range: Any range adjustable within the temperature range, minimum span 50 °C
Spectral Ranges: Channel 1: 0.9 μm;
Channel 2: 1.05 μm
Resolution: 0.1 °C or 0.2 °F at interface;
< 0.0015% of selected sub range at analog output, min. 0.1°C, 16 bit; 1°C or 1 °F on display
Emissivity ε:

0.050 to 1.000 in steps of 1/1000

(1-color mode)

Transmittance τ: 0.050 to 1.000 in steps of 1/1000 (1-color mode)
Emissivity Slope K: 0.800 to 1.200 in steps of 1/1000 (2-color mode) 
Measurement Uncertainty:
(ε = 1, t90 = 1 s,
TAmb. = 25 °C)
< 1500 °C: 0.3% of reading in °C + 2 °C
> 1500 °C: 0.6% of reading in °C
Repeatability:
(ε = 1, t90 = 1 s,
TAmb. = 25 °C)
0.15% of reading in °C + 1 °C

 

Optical Specifications
Sighting Built-in laser aiming light (max. power level < 1 mW, λ = 630 to 680 nm, CDRH class II) or through-lens sighting
Optics: Manually focusable from rear cover measuring distance a = 210 to 5000 mm
Distance Ratio:

MB 14                           approx. 100 : 1

MB 18                           approx. 190 : 1

MB 25 and MB 30        approx.  350 : 1

Environmental Specificatons
Protection Class: IP 65 IEC 60529 (value in mated condition)
Operating Position: any
Ambient Temperature: 0 to 65°C at housing
Storage Temperature -20 to 80°C
Relative Humidity: Non condensating conditions
Weight: 0.6 kg
Housing: Stainless steel
CE Label: According to EU directives about electromagnetic immunity

Note: MB is a shortcut used for temperature range (in German: Messbereich)

Interface  
Connection: 12-pin connector
Display (in rear cover): LED, 4 digit matrix, 5 mm high for 2-color or 1-color temperature signal or measuring distance
Parameters: Adjustable via interface:
2-color / 1-color temperature signal, metal mode, accordingly emissivity slope or emissivity, temperature sub range, settings for maximum value storage, address, baud rate, switch off limit, "dirty window" warning, transmittance, response time t90, 0 to 20 mA or 4 to 20 mA analog output range, °C / °F
Readable via interface: measured value, internal temperature of the unit, measuring distance
Communication  
Analog Output: Adjustable 0 to 20 mA or 4 to
20 mA, linear (via digital interface)
Digital Interface:

RS485 addressable (half-duplex)
Baud rate: 1200 Bd to 115.2 kBd
(on request RS232 (not addressable)

Switch Off Limit: 2% to 50% (adjustable via interface)
"Dirty Window" Warning:  Relay contact, max. continuous current 0.4 A, setting of the warning level: 0 (off) to 99%
Response Time t90: 2 ms (with dynamic adaption at low signal levels); adjustable to 0.01 s; 0.05 s; 0.25 s; 1 s; 3 s; 10 s
Maximum Value Storage: Built-in single or double storage. Clearing with adjusted time tclear (off; 0.01s; 0.05 s; 0.25 s; 1 s; 5 s; 25 s), via interface, automatically with the next measuring object, external contact, hold-function

 

Electrical  
Power Supply: 24 V DC ± 25%, ripple must be less than 50 mV
Power Consumption: Max. 3 W ( incl. laser)
Load (analog output): 0 to 500 Ω
Isolation: Power supply, analog output and digital interface are galvanically isolated from each other
IMPAC 测温仪 ISR 6 Advanced
MB 14: Focusable Optic a=210 ...5000 mm
MB 18: Focusable Optic a=210 ...5000 mm
MB 25: Focusable Optic a=210 ...5000 mm
MB 30: Focusable Optic a=210 ...5000 mm

光路显示:

查找您当地的代理

查找产品服务或买一台新的仪器.

全方位服务和支持

查找所有现场服务选项和资产保障.