IMPAC Pyrometer
IS 12 & IS 12-S

Highly accurate. Fully digital. Fast. Very robust high-end pyrometer for non-contact temperature measurements on metals, ceramics, graphite etc. between 550 and 3500 °C.

The IS 12 is also available as a special version with integrated scanner (IS 12-S).

 

Pyrometer IS 12 View
Pyrometer IS 12 Front View
Pyrometer IS 12 Back View
Pyrometer IS 12 Back Display View
Pyrometer IS 12 Side Left View
Pyrometer IS 12 Side View

Key Features

  • Temperature ranges between 550 and 3500 °C
  • Short response times < 1 ms
  • Extremely small spot sizes min 0.1 mm
  • Distance ratio up to 900 : 1
  • Built-in 5 digit LED display
  • Thru-lens view finder, or with additional laser targeting light
  • Test current output
  • 2 fast limit switches Interfaces RS232 / RS485 switchable
  • With fixed or focusable optics

Details

The IS 12, IS 12-S, IGA 12 and IGA 12-S are very robust, digital and highly accurate pyrometers for non-contact temperature measurement on metals, ceramics, graphite etc. For optimal match of the instrument to the application 6 different fixed optics and 3 different focusable optics with extremely small spot sizes are available.

The pyrometer parameters can be selected via keys, the settings are indicated on the built-in LED display. In measuring mode the actual temperature is indicated. The pyrometers are equipped with RS232 and RS485 serial interfaces (switchable via the keys). This additionally enables the reading of temperature and pyrometer parameters via the provided InfraWin PC-software. If necessary the parameters also can be changed via PC.

Two adjustable limit switches can be used to trigger a switch process, e.g. to recognize hot objects located in the measuring beam. A thru-lens view finder or additionally a laser targeting light for exact alignment of the pyrometer is available.

The instruments IS 12-S and IGA 12-S are equipped with an integrated scanner which moves the measuring beam adjustable up and down up to 4°.

Typical Applications:

  • preheating 
  • annealing 
  • tempering 
  • welding 
  • forging 
  • hardening 
  • sintering 
  • melting 
  • soldering 
  • rolling 
  • brazing 
  • normalizing

Documentation

Technical Specifications

MEASUREMENT SPECIFICATIONS
Temperature Ranges

MB 14    550 to 1400 °C      

MB 16    600 to 1600 °C      

MB 18     650 to 1800 °C       

MB 25     750 to 2500 °C       

MB 20L   550 to 2000 °C      

MB 35L   700 to 3500 °C       

Sub Range: Any range adjustable within the temperature range, minimum span 51 °C
Spectral Ranges: 0.7 to 1.1 μm
Signal Processing: Fotoelectric current, digitized immediately

Accuracy:

(at ε=1, T90=1 s,

T amb.=23 °C)

below 1500 °C: 0.3% of measured value in °C + 1 °C

above 1500 °C: 0.5% of measured value in °C

Ambient Temperature Dependency:

t K ≤ 0.01% of reading (in °C) x dT

(temperature of pyrometer housing - 23 °C)

Resolution:

interface and display: 0.1°C,

analog output: < 0.025 % of temperature range

Repeatability: 0.1% of measured value in °C + 1°C
Emissivity ε: 0.100 ... 1.000 in 1/1000 steps
Exposure Time t90: < 1 ms ("L" temperature ranges with dynamical adaptation at low signal levels), adjustable up to 10 s
Maximum Value Storage:

single or double storage; cleared by:

- preselected time interval

- external deletion contact or via digital interface - automatically with the next measuring object

Sighting: built-in parallax free thru-lens view finder; additionally laser targeting light (max. power level < 1 mW, λ = 630-680 nm, CDRH class II)

Note: The calibration / adjustment of this pyrometer is carried out in accordance with VDI/ VDE 3511, Part 4.4. See http://info.lumasenseinc.com/calibration for more information. 

COMMUNICATION  / INTERFACE


Analog Output:

 

linear 0 ... 20 mA or 4 ... 20 mA, DC, switchable; load max. 500 Ohm

Serial Interface: switchable at the pyrometer: RS232 or RS485 addressable, half duplex; baud rate 2.4 up to 115 kBd
Display: built-in 5 digit LED display, additional function LEDs
Test Current Output: 

fixed 10 mA

Limit switches: 2 relay outputs (change-over contacts), switch power max. 30 W (Imax: 1 A, Umax: 60 V DC)
Control Panel: 4 keys, operate with tip of ball-point pen
Parameters:

Adjustable at the instrument or via serial interface:

emissivity e, response time t90, clear time for maximum value storage tCL, subrange, 0 to 20 or 4 to 20 mA, switch points for limit switches, °C / °F, interface RS232 or RS485, address, baud rate, test current output

Additionally adjustable (only via interface): keyboard lock, recalibration (with special software)

ELECTRICAL  
Power Supply: 24 V DC (15 to 40 V DC) or 24 V AC (12 to 30 V AC), 48 to 62 Hz
Power Consumption: max. 7 W
Isolation: power supply, digital interface, analog output are galvanically isolated against each other and housing
ENVIRONMENTAL 
Ambient Temperature: 0 to 70 °C at housing, no condensating conditions
Storage Temperature: -20 to 70 °C
Rel. Humidity: Non condensing conditions
Protection Class: IP65 (DIN 40 050)
Weight: 2.2 kg
CE-Label: according to EU directives about electromagnetic immunity
IMPAC Pyrometer IS 12 & IS 12-S
MB 14: Fixed Optics 1 a=80 mm
MB 14: Fixed Optics 2 a=160 mm
MB 14: Fixed Optics 3 a=250 mm
MB 14: Fixed Optics 4 a=660 mm
MB 14: Fixed Optics 5 a=1300 mm
MB 14: Fixed Optics 6 a=5600 mm
MB 16 & 18 & 20L
Fixed Optics 1
a=80 mm
MB 16 & 18 & 20L
Fixed Optics 2
a=160 mm
MB 16 & 18 & 20L
Fixed Optics 3
a=250 mm
MB 16 & 18 & 20L
Fixed Optics 4
a=660 mm
MB 16 & 18 & 20L
Fixed Optics 5
a=1300 mm
MB 16 & 18 & 20L
Fixed Optics 6
a=5600 mm
MB 25 & 35L
Fixed Optics 1
a=80 mm
MB 25 & 35L
Fixed Optics 2
a=160 mm
MB 25 & 35L
Fixed Optics 3
a=250 mm
MB 25 & 35L
Fixed Optics 4
a=660 mm
MB 25 & 35L
Fixed Optics 5
a=1300 mm
MB 25 & 35L
Fixed Optics 6
a=5600 mm
MB 14: Foc. Optics 1 a=277...533 mm
MB 14: Foc. Optics 2 a=388...1170 mm
MB 14: Foc. Optics 3 a=550...9500 mm
MB 16 & 18 & 20L
Foc. Optics 1
a=277...533 mm
MB 16 & 18 & 20L
Foc. Optics 2
a=388...1170 mm
MB 16 & 18 & 20L
Foc. Optics 3
a=550...9500 mm
MB 25 & 35L
Foc. Optics 1
a=277...533 mm
MB 25 & 35L
Foc. Optics 2
a=388...1170 mm
MB 25 & 35L
Foc. Optics 3
a=550...9500 mm

Display of optical path:

Find Your Local Representative

To find a service for your product or to buy a new one.

Turn-key Service and Support

Find out all field services options and asset assurance.