IMPAC DA 6000-N LED digital display with RS232 interface for digital pyrometers
Reference number: 3 890 560
- For stationary IMPAC digital pyrometers
- Temperature display with 5 digit 7-segment LED
- Mode display with 4 digit alphanumeric LED
- Everything via digital R232 interface
- Fast temperature display
- Read and change all pyrometer parameters without PC
DA 6000-N is a high-precision LED indicator for IMPAC non-contact temperature measuring devices with excellent additional properties.
Beyond pure indication of measured temperature, you can parametrize a connected IMPAC digital pyrometer via the DA 6000-N completely, without any PC. This is especially interesting for measurement of batches with different properties (e.g. different emissivities or different dimensions). When a new batch starts, you can change the corresponding parameters from the operation desk (e.g. emissivity, response time, reset time of the maximum value storage, measuring subrange).
The digital interface of DA 6000-N version is a RS232.
5 digit 7 segment LED, 13 mm, red
4 digit LED matrix, 5 mm, red
85...265 V AC, 48...62 Hz or 18...30 V DC, ripple max 0.5 Vpp
approx. 7 VA (no external devices connected)
Galvanically separated, RS232 Baudrate 1.2...38.4 kBd for communication with a digital pyrometer
Operating ambient temperature
0...50°C on the housing
approx. 350 g
Front panel IP 40, otherwise IP 20 (DIN 40 050)
0.1°C up to 999,9°C; 1°C for temps. above (0.2°F up to 1831.8°F, 1°F above)
Plasic housing (flame retardant Noryl), 48 x 96 x 141 mm (DIN 43 700) front panel fixed with screw clips.
Front panel cut-out
45+0,6 x 92+0,8 mm
Mounting depth required
= 165 mm with clips and cable
Plug-in clips, clamping area 0.13 to 2.5 mm2 (AWG 28 to 16) with conductor end tubes 0.5 to 1.5 mm2
depends on baud rate, e.g. 50 ms at 19.2 kBd
Display refresh time: 300 ms or immediately (see measuring rate) at changes > 5°C
Toggling °C/°F display unit only, not pyrometer
Menu depends on type connected pyrometer and operating mode