IMPAC Pyrometer
IN 210/5

Pyrometer especially for temperature measurements of glass surfaces and quartz glass surfaces between 100 and 1200 °C.

Pyrometer IMPAC IN 210/5
Pyrometer IMPAC IN 210/5 Side View

Key Features

  • Spectral range optimized for measurement of glass surfaces
  • Small, robust stainless steel housing for easy installation, with electrical connector for facile mounting / demounting
  • 2-wire technique for current supply and temperature measurement at the same time
  • Internal digital signal processing for high accuracy
  • High quality optics for detection of small measuring objects
  • Temperature subrange programmable for adaptation of the analog output to the measuring task


The IN 210/5 is a stationary pyrometer for non-contact temperature measurement of glass surfaces and quartz glass surfaces. The instruments are operating as digital two wire pyrometers. This technique combines the high accuracy of the digital signal processing with the simple connection and operating with two wires.

The setting of the programmable parameters such as emissivity, subrange and response time can be adjusted either with the portable setting device HT 6000 or via USB adapter and the setting software InfraWin. This enables the instrument to be adapted to various measuring tasks. On request all necessary values can be set ex works.

The solid and robust design of the instrument guarantees high operational safety even in rough industrial environments.


Technical Data

Temperature range:  100 ... 1200°C
Spectral range: 5.14 µm



1% of reading in °C + 1°C

(ε =1, Tamb=25°C, t90= 1 s)



0.5% of reading in °C + 1°C

(ε =1, Tamb=25°C, t90= 1 s)

Resolution:  0.1 °C
Parameters 1): Sub range, emissivity, response time
Response time t90 120 ms, adjustable up to 10 s via service interface
Emissivity ε: 0.2 to 1.0 adjustable via service interface
Output: 4 to 20 mA, linear; max. load 700 Ohm at 24 V

1) Programming via service interface with portable battery driven setup device HT 6000 or via USB adapter and software InfraWin (optional) or preset ex works (on request)

Power supply:  24 V DC ± 25%; ripple ≤ 500 mV
Power consumption:  Max. 0.6 W
Aperture:  15 mm
Protection class: IP65 (according to DIN 40 050)
Ambient temp.: 0 to 70 °C
Storage temp.: -20 to 70 °C
Weight: Approx. 450 g
CE-label: According to EU directives about electromagnetic immunity
IMPAC Pyrometer IN 210/5
Optics 100 a=100 mm
Optics 300 a=300 mm
Optics 1200 a=1200 mm

Display of optical path:

Find Your Local Representative

To find a service for your product or to buy a new one.

Turn-key Service and Support

Find out all field services options and asset assurance.