IMPAC Pyrometer
IS 210

Pyrometers in 2 wire form with digital signal processing for temperature measurements of metal surfaces, graphite, ceramics etc. between 650°C and 2500 °C.

Pyrometer IMPAC IS 210

Key Benefits

  • Small, robust stainless steel housing for easy installation with electrical connector for facile mounting / demounting
  • 2-wire technique for current supply and temperature measurement at the same time
  • Internal digital signal processing for high accuracy
  • High quality optics for detection of small measuring objects
  • Built-in LED targeting light for fast and precise alignment to the measuring object
  • Built-in maximum value storage detects always the highest temperature value of a series of measurements
  • Temperature subrange programmable to adapt the analog output to the measuring task


IS 210 and IGA 210 are stationary pyrometers for non-contact temperature measurement of metal surfaces, graphite, ceramics etc. The instruments are digital pyrometers in two wire format. This format combines the high accuracy of the digital signal processing with the simple connection and operating with two wires.

The setting of the programmable parameters such as emissivity, subrange, response time or maximum value storage can be adjusted either with the portable setting device HT 6000 or via USB adapter and the setting software InfraWin. This enables the instrument to be adapted to various measuring tasks. On request all necessary values can be set ex works.

The solid and robust design of the instruments guarantees high operation safety even in rough industrial environments.

  IS 210
Temperature range: 

MB 18  650 ... 1800 °C
MB 25  800 ... 2500 °C


Technical Data

Temperature range: 

MB 18    650...1800 °C 

MB 25    800...2500 °C  

Spectral range:

0.8 to 1.1 µm

Accuracy 1) : 0.5% of reading in °C + 1°C 
Repeatability 1) : 0.1% of reading in °C + 1°C
Resolution:  0.1 °C
Parameters 2):

Sub range, emissivity, response time,

maximum value storage

Response time t90 20 ms ... 10 s
Clear time of maximum value storage: Off, 50 ms, 250 ms, 1 s, 5 s, 25 s, auto 
Emissivity ε: 0.05 ... 1.0
Output: 4 - 20 mA, linear; max. load 700 Ω at 24 V

1) (ε = 1, Tamb.= 25°C, t90 = 1 s)

2) Programming via service interface with portable battery driven setup device HT 6000 or via USB adapter and software InfraWin (optional) or preset ex works (on request)


Power supply:

24 V DC ± 25%, ripple 500 mV;

LED targeting light: 5 to 30 V DC, 35 mA

Power consumption:  Max. 0.6 W  (without LED targeting light)
Sighting: LED targeting light
Protection class: IP65 (according to DIN 40 050)
Ambient temp.: 0 to 70 °C
Storage temp.: -20 to 70 °C
Weight: Approx. 450 g
CE-label: According to EU directives about electromagnetic immunity

Scope of delivery: Instrument, works certificate, user manual.

Ordering note: A connection cable is not included in scope of delivery and has to be ordered separately

IMPAC Pyrometer IS 210
MB 18 Optics 600 a=600 mm
MB 25 Optics 600 a=600 mm
MB 18 Optik 1000 a=1000 mm
MB 25 Optics 1000 a=1000 mm
MB 18 Optics 1500 a=1500 mm
MB 25 Optics 1500 a=1500 mm

Display of optical path:

Find Your Local Representative

To find a service for your product or to buy a new one.

Turn-key Service and Support

Find out all field services options and asset assurance.