Corps noir M340
Portable, sub-zero temperature blackbody calibration source. Compact, high resolution, and high temperature stability for low temperatures -20 … 150 °C
- Compact, lightweight
- Exceptional accuracy
- High stability ±0.1 °C
- High effective emissivity
- Very fast slew rates – heat/cool
- 51 mm (2”) aperture diameter
- High uniformity
- Easy to operate
- Manufactured and tested to meet rigid quality control standards
- Furnished with certificate of calibration traceable to NIST
The M340 is a portable blackbody calibration source covering the range from sub-zero to 150 °C with 0.1° resolution. The thermoelectric heating/cooling mechanism is utilized to achieve a compact and easy-to-use blackbody source.
The M340 has unusually high temperature stability and a stabilization time of only 10 minutes. Source temperature is closely controlled by a self-tuning PID controller which displays temperature on a digital readout.
Typical Calibration Applications
- Infrared Temperature Sensors
- Infrared Thermal Imaging Systems
- Spectrographic Analyzers
- Flux Meters
|Temperature Range||-20 °C ... 150 °C|
|Temperature Uncertainty1||Standard Radiometric calibration:
± 1 °C @ 8 … 14 μm
Optional Thermometric calibration:
± 0.1 °C (only on 14750-4C & 14750-5C)
|Display Accuracy vs. NIST Calibration||See supplied NIST calibration report|
|Temperature Resolution||0.1 °C|
|Stability2||± 0.1 °C per 8 hour period|
|Source Non-Uniformity3||± 0.2 °C less than 100 °C, ± 1.3 °C greater than 100 °C|
|Heated Emitter Shape||Flat Plate|
|Exit Port Diameter||51 mm (2.00 in)|
|Emissivity||Radiometric calibration: 1.0 @ 8 … 14 μm
Thermometric calibration: ~ 0.98
Standard Calibration Method
Optional Calibration Method:
|Temperature Sensor||Precision platinum RTD|
|Warm-up Time4||~ 6 minutes from ambient to –15 °C or 100 °C|
|Slew Rate to 1 °C Stability||~ 40°/min from ambient … 150 °C
~ 20°/min from 20 … 10 °C
~ 3°/min from -10 … -20 °C
|Slew Rate to 0.1 °C Stability||Approximately 2 minutes between Δ 10 °C setpoints (slightly longer T < -10 °C)|
|Communication / Interface|
|Remote Set Point||Via RS232|
|Method of Control||Digital Self Tuning PID Controller|
|Operating Ambient Temperature5||5 °C ... 40 °C|
|Cooling||Peltier Modules for heating and cooling|
|Operating Humidity||90% RH max, non-condensing in heating mode. Environment dew point must be less than setpoint when in cooling mode. (N2 purge connection available)|
|Dimensions (H x W x D)||167 mm x 280 mm x 280 mm
(6.5” x 11.0” x 11.0”)
|Method of Mounting||Bench/Table|
|Weight||7.1 kg (15.6 lbs)|
|Power Requirements||115 V AC 50 & 60 Hz, 300 W maximum (optional 100 or 230 V AC)|
1 Accuracy is defined for ambient temperature of 18 °C … 23 °C.
2 Provided stable AC mains voltage and minimum air flow across the exit port or emitter plate.
3 Emitter uniformity is defined for 1.6” (40 mm) diameter of central area.
4 Typical. Can vary from unit to unit.
5 To achieve low temperature setpoint of -20 °C, ambient must be ≤ 25 °C (77 °F).