Corps noir M 330-EU

High Temperature Blackbody Calibration Source

High temperature calibration source, 300 °C to 1700 °C (572 °F to 3092 °F)

Corps noir M330-EU View
Corps noir M330 View

Key Features

  • High effective emissivity 1.0 at 0.65-1.8 µm
  • High accuracy
  • Excellent stability +/-1°C per 8 hour period
  • Fast slew rate (limited to 20°C/min)
  • Manufactured and tested to meet rigid quality control standards
  • Furnished with certificate of calibration traceable to NIST
  • Wide temperature range
  • RS 232 serial communication (standard), RS 485 (optional)


The M330 is a blackbody calibration source utilizing a digital indicating temperature controller that may be set to any temperature between 300 °C (572 °F) and 1700 °C (3092 °F). A precision thermocouple controls the blackbody cavity providing high accuracy and repeatability. A closed-end tube with a 25 mm (1”) aperture diameter is heated by specially manufactured elements. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within +/-0.5 °C. The blackbody uses a resistive heater that provide long life. (Running at temperatures greater than 1600 °C for long periods will shorten heater life.)  An independent over-temperature power cutout system is an added safety feature. An internal fan keeps the cabinet surfaces at a safe, comfortable temperature.

Typical Calibration Applications

  • Infrared Temperature Sensors
  • Infrared Thermal Imagers
  • Spectroradiometers
  • High Energy Photon Generators
  • Solar Radiance Simulation
  • Optical Pyrometers 



Temperature Range: 300 °C to 1700 °C (572 °F to 3092 °F)
Accuracy*: ±0.25% of reading ±1 °C
Temperature Resolution: 0.1 °C
Stability: ±1 °C per 8 hour period
Source Non-Uniformity ±1 °C within center 1/3 of ID
Cavity: Closed end tube 41 mm ID X 255 mm long with ≈125 mm heated length.
Aperture Diameter: 25 mm (1”)
Emissivity: 1.0 at 0.65-1.8 µm (lower at longer wavelengths-a correction table is supplied in the manual)
Calibration Method: Radiometric (pyrometric)
Temperature Sensor: Type B thermocouple
Remote Set Point: Via serial port
Method of Control: Digital Self-Tuning PID Controller
Warm-up Time: 45 min. from ambient to 300 °C
65 to 80 min. from 300 to 1600 °C
Operating Ambient Temp: 0 °C to 44 °C (32 °F to 110 °F)
Cooling: Fan cooled, air inlet on rear panel
Operating Humidity: <90% RH, non- condensing
Power Requirements:

208...240V AC, 50 & 60 Hz, (US), 3000VA Maximum

230V AC, 50 Hz (EU)
Dimensions (H x W x D):

648 mm (H) x 500 mm (W) x 551 mm (D) (25.52” x 19.7” x 21.7”) 

Weight: 80 kg (175 lbs.)
CE Certified: Yes

        *Accuracy calibration performed radiometrically, the uncertainty of emissivity and transfer standard are already included

Trouvez votre représentant local

Service pour produit existant ou acheter un nouveau produit

Support client et offre de service

Trouver nos offres de service de maintenance / d’étalonnage sur site.