IMPAC Pyromètre
IGA 140-PN
Pyromètre avec liaison série Profinet et vario-optique pour la mesure de température sans contact de métaux, céramique, graphite etc entre 220 et 3000 °C
Principales caractéristiques
- Plages de mesure entre 220 et 3000 °C
- Liaison série Profinet
- Rapide < 1 ms en option 500 µs
- Très petits spots de mesure, à partir de 0,35 mm
- Ecran LCD intégré avec affichage de la température
- Visée oculaire optimisée ou visée laser
- Boîtier avec rail pour fixation et montage précis
- Sortie analogique en complément Vario-optiques
Détails
Les pyromètres IS 140-PB et IGA 140-PB sont des pyromètres digitaux très précis avec liaison série Profinet pour la mesure de température sans contact de métaux, céramique, graphite etc.
Trois vario-optiques, avec de très petits spots de mesure, sont disponibles afin d'adapter les appareils de façon optimale à l'application.
L’écran intégré indique la température instantanée ainsi que le facteur émissif.
Une visée laser ou une visée oculaire permet de cibler l’objet à mesurer.
La liaison série Profibus-DP permet d’intégrer sans problème les pyromètres dans une installation Profinet. Le fichier GSDML livré permet, en cas de besoin, de choisir entre 5 modules de configuration différents.
La projection s’effectue avec un outil de projection quelconque.
Applications typiques
- Préchauffe
- Laminoirs
- Recuit
- Brasage
- Soudage
- Métaux
- Forgeage
- Métaux non ferreux
- Trempe
- Céramique
- Fonte
Technical Specifications
Measurement Specifications | |
---|---|
Temperature Range: |
MB 13: 300 ... 1300 °C MB 18: 350 ... 1800 °C MB 25: 450 ... 2500 °C MB 13.5L: 250 ... 1350 °C MB 20L: 300 ... 2000 °C MB 25L: 350 ... 2500 °C other temperature ranges on request |
Sub Range: | Any range adjustable within the temperature range, minimum span 51 °C |
Spectral Ranges | 1.45 - 1.8 µm |
Signal processing: | Photoelectric current, digitized immediately |
Measurement Uncertainty: (ε = 1, t90 = 1 s, Tamb. = 23 °C) |
Up to 1500 °C: 0.3% of reading in °C + 1 °C; Above 1500 °C: 0.5% of reading in °C |
Repeatability: (ε = 1, t90 = 1 s, Tamb. = 23 °C) |
0.1% of reading in °C + 1 °C |
Resolution: | 0.1 °C on interface; < 0.025% of the adjusted temperature sub range at the analog output |
Response time t90: | < 1 ms, adjustable up to 10 s (“L” temperature ranges: with dynamical adaption at low signal levels) |
Emissivity ε: | 10.0 to 100.0% adjustable via interface in steps of 0.1% |
Environmental Specifications | |
---|---|
Protection Class: | IP65 (DIN 40 050)
|
Ambient Temperature: | 0 to 70 °C at housing |
Storage Temperature: | -20 to 80°C |
Weight: | Approx. 550 g |
CE Label: | According to EU directives about electromagnetical immunity |
Interface | |
---|---|
Sighting: | Laser targeting light (max. power level < 1 mW, λ = 630-680 nm, CDRH class II) or thru-lens view finder |
Parameters: | Adjustable at the instrument or via serial interface: emissivity; response time; analog output; address; baud rate; waiting period tW; temperature unit °C or °F; setting of the maximum value storage; temperature sub range |
Note: The determination of the technical data of this pyrometer is carried out in accordance with VDI/VDE IEC TS 62942-2, the calibration / adjustment in accordance with VDI/VDE 3511, Part 4.4. See http://info. lumasenseinc.com/calibration for more information. |
Communication | |
---|---|
Analog Output: | Linear 0 to 20 mA or 4 to 20 mA, DC, switchable; load max. 500 Ohm |
Test current output: | Fixed 10 mA (for 0 to 20 mA analog output) or fixed 12 mA (for 4 to 20 mA analog output) |
Serial Interface: | Switchable inside the pyrometer: RS232 or RS485 addressable, half duplex; baud rate up to 115 kBd Alternatively: Profibus, Profinet, or Ethernet |
Exposure Time t90: | 2 ms (with dynamical adaptation at low signal levels); adjustable to 0.01 s; 0.05 s; 0.25 s; 1 s; 3 s; 10 s |
Maximum Value Storage: | Single or double storage; cleared by: preselected time interval; external deletion contact or via digital interface; automatically with the next measuring object |
Electrical | |
---|---|
Power Supply: | 24 V AC/DC (12 to 30 V AC/DC) (AC: 48 to 62 Hz) |
Power Consumption: | max. 2 VA |
Isolation: | Power supply, digital interface, analog output are galvanically isolated against each other and housing |
Video Module (TV Version only) | |
---|---|
Video signal: | FBAS-Signal approx. 1 Vpp at 75 Ohm, PAL (B), 50Hz (optional NTSC (M), 60 Hz) |
Resolution: | 628 x 582 Pixel (510 x 492 at NTSC) |
Illumination control: | Automatic or adjustable (via keyboard or software) |
Field of view: | Approx. 6.3% x 4.6% (3.6° x 2.6°) of the adjusted measuring distance (5.1% x 3.9% (2.9° x 2.2°) for NTSC) |
Connection video signal: | SCART- or Cinch plug (monitor’s side); separate round plug (at the pyrometer); connections galvanically isolated; video signal selectable when more than one pyrometer with TV output is used |
Date / time: | Real time clock with about 3 days buffer (GoldCap capacitor, free of harmful substances) |
Screen display: | Circular target marker; instrument’s number or text to your choice (max. 12 characters); time and / or date (switchable); measured temperature, emissivity |
Focusable Optics 1 | a=130...200 mm |
Focusable Optics 2 | a=190...420 mm |
Focusable Optics 3 | a=340...4000 mm |