LumaSMART iCore™

LumaSMART iCore™ provides advanced communications, local display, and memory to enhance Smart Grid integration and performance.

The LUMASMART iCore provides Smart grid ready advanced communications

Контроллер LumaSmart iCore™ имеет встроенный интерактивный сенсорный дисплей для отображения данных АРГ, полученных от SmartDGA EZHub™ с помощью программного обеспечения DGA Viewer™. ПО DGA Viewer™ позволяет на месте просматривать данные АРГ, собранные приборами SmartDGA®. С помощью DGA Viewer™ возможно задать предельные уровни концентрации газов для активации сигналов о предупреждении, опасности и тревоге. Устройство LumaSmart iCore™ также обеспечивает обмен данными с внешними системами с использованием протоколов RS485 или Ethernet. К устройству LumaSmart iCore™ возможно подключить до 4-ех модулей EZHub™ с помощью соединений Ethernet или RS485.

документация

Multiple EZHub™ Setup with Ethernet Hub or Switch

Multiple SmartDGA EZHub Setup with Ethernet Hub or Switch

Technical Data

Environmental
Operating Temperature* -40 to 70 °C
Storage Temperature -40 to 75 °C
Storage Humidity (non-condensing) 1-99% RH
Dimensions
(L x H x D)
8.7” x 7.4” x 6.6”
Weight 11.02 lbs
 
Standards Compliance
The SmartDGA system underwent thorough testing and complies with the following standards.
Emissions / Immunity

EN 61000-6-5 (2001)

EN 61000-6-4 (2007) +A1

EN 61000-3-2 (2006) +A1

EN 61000-3-3 (2008)

Environmental / Vibration ETSI EN 300 019-2-4
Surge Protection 4000V (IEEE C37.90.1-2002)
EZHub™ & LumaSMART iCore™ Specifications 

Power Supplied to EZHub & iCore

90 ~ 264 VAC, 127 ~ 370 VDC, 47 ~ 63 Hz, 6.5 A max

Power Supplied to Instrument 48 VDC ~ 4.16 A max

Memory

Up to 40+ years worth of data storage available with optional iCore

Data Export (Available with EZHub and iCore/PC) Export of results to date in a single file onto a USB memory stick. When using iCore/PC, user can select date range; when using EZHub port, all data is exported

Available Communications (Available with EZHub)

Proprietary communications via RS485 and Ethernet connections to DGA Viewer software

Optional Communications (Modbus available with PC, others available with iCore) IEC61850 Edition 2, DNP3 IEEE Std 1815-2012, ModBus RTU V1.02, ModBus TCP/IP 1.0b protocols
EZHub Alarm Contacts  (3) programmable relay outputs (Type C, NO/NC) for caution, warning, & alarm (1) alarm relay output for system status (Type C, NO/NC)
Relay Contact Ratings Single phase alarm relays (8 A, 250 VAC; 5 A, 30 VDC)

*For operating temperatures less than -20 °C, the cold weather cable is required. Additional eating of oil transfer lines may be required for operation in cold locations. The unit will generate a system fault if the mineral oil temperature is outside of standard fluid limits of -20 and 120 °C. For operating in environments where the temperature routinely exceeds 40 °C, the high temperature accessory is recommended to prevent premature aging and reduction of component lifetime. Temperatures are based upon air temperatures for unit installation in shaded location.

Найти местных представителей

To find a service for your product or to buy a new one.

Turn-key Service and Support

Find out all field services options and asset assurance.