SF6 Leak Testing
Photoacoustic SF6 Leak Detectors are market-leading instruments to perform integral leak testing on gas-insulated switchgear and to check compliance against international standards.
With the global trend moving toward more high-voltage and ultra-high-voltage infrastructures in the Transmission and Distribution industry, more and more SF6 gas-insulated switchgears (GIS) are being used.
Since SF6 is the most potent greenhouse gas with an extremely high global warming potential, emission standards are being enforced by regulating authorities. At the same time, no viable alternative to SF6 exists in the short term for the power industry, so stakeholders have been proactive and set in place voluntary action plans to define more stringent emission standards for the design, manufacturing, and operation of SF6 GIS.
SF6 Filled Equipment Testing
Integral leak tests, also known as cumulative sealing tests or tightness tests, are the preferred test method for type testing of medium-voltage and high-voltage GIS according to the IEC 62271-1.
Some GIS manufacturers have chosen to use integral leak tests, not only for type testing, but also for their routine testing (self-declaration) in order to reduce their overall manufacturing cycle time.
Photoacoustic infrared spectroscopy is actually listed as the state-of-the-art and most sensitive technique for quantitative tightness test by the reference document in the industry: SF6 Tightness Guide, CIGRE Technical Brochure 430 – WG B3.18.
The low detection limit and high accuracy of our SF6 Leak Detector (INNOVA 3434i) enable manufacturers to complete their quality tests more efficiently, in a shorter time, and with great precision, while complying with the most stringent design standards for SF6 tightness.
The system measures the total concentration of the SF6 gas in an enclosed area where the switch gear (or other SF6 filled equipment) is installed to determine leak rate. By accurately measuring leak rate, utilities can improve operational quality while decreasing costs and emissions.
40+ Years of Experience with PAS
Meet and comply with environmental regulations
Operational advantages: fast and reliable integral leakage monitoring
Best-in-class quantitative leak detection method listed in CIGRE’s SF6 Tightness Guide
Easily Expandable to other / additional gas(es) by selecting a different optical filter
- For large test chambers, or parallel operation of multiple chambers: capability to expand to multi-point monitoring with INNOVA 1409 sampler
LumaSoft 7810 (or 7870) application software completes the system with user-friendly graphical interfaces to setup and supervise the leak monitor
Low cost of ownership
Схема подключения монитора элегаза с «мультипликатором»: локальный или удаленный компьютер подсоединяется к монитору утечек элегаза, синхронизирует монитор и «мультипликатор». Идентичное программное обеспечение с OPC интерфейсом, устанавливается на любом из компьютеров (локальном или удаленном) и предоставляет доступ к данным в режиме он-лайн. Два сигнальных релейных выхода, позволяют подсоединить приборы к локальному устройству световой или звуковой сигнализации, или к устройству дистанционной передачи предупреждений.