Glass Melting Furnace
Energy consumption represents a significant portion of the total glass production. The glass melting tank is where the process starts with sand, limestone, soda ash, and cullet fed into a furnace for melting. Furnaces can use fossil fuels or electricity for the heating process which represents about 80% of the total energy usage. While fossil fuels still remain relatively economical, nowadays electrical boosters are often used to enhance capacity or temperature uniformity.
Improved monitoring of the glass temperature can help ensure product uniformity and improve efficiency by reducing cycle time by controlling the melting process.
Another important factor is an effective insulation of the melting furnace as it suffers heavy wear and stresses caused by the continuous filling and emptying of molten glass.
In glass production, viscosity is the most important parameter, and is directly related to the glass temperature. Bulk glass temperatures can be measured with radiation pyrometers more accurately and economically than traditional thermocouples. Choosing the proper pyrometer wavelength allows one to penetrate deep into glass and measure the bulk temperature accurately. Improved monitoring of the glass temperature can help ensure product uniformity, as well as reduce cycle time by controlling the melting process, thereby improving efficiency.
Protecting Critical Assets
With the high temperature required for glass processes, the refractory in the melting tank faces severe challenges and should be monitored carefully. Molten glass is very corrosive, so the refractory for the bottom of the melting tank is of special grade and quite expensive. The refractory used for the crown area always encounters the highest temperature in the melting tank, so its life can be shortened if temperature is not monitored and controlled well. Port arch temperature provides good information of the furnace condition and is important for combustion monitoring as well. Monitoring the bridge-wall temperature can provide a furnace temperature profile to avoid overheating.
All of these applications can be addressed with radiation pyrometers or thermal imagers. When electrical boosters are used, radiation pyrometers also offer an advantage that the measurement is immune to the electrical current.
LumaSense Technologies has developed a complete solution for monitoring the glass melt furnace. This rugged, industrial design incorporates field proven components and is easy to retrofit into existing thermocouple wells such as on the crown refractory. The system can help optimize the furnace operation by measuring the bulk glass temperature, monitor or controlling burner output, and monitor the health of the refractory components. This will enable the user to maximize production efficiency. The system includes the following components and features:
- IS 50-LO plus & IS 50-LO/GL pyrometers: Short wavelength infrared pyrometers that can be mounted in existing thermocouple wells, or through viewports, for internal refractory monitoring. The IS 50-LO/GL pyrometer is specially tuned to measure the bulk glass temperature. Both pyrometers are provided in industrial housing with flexible fiber-optics and lensing withstanding 250 °C for ease of installation.
- IS 8 pro and IGA 8 pro: Portable Pyrometers for mobile refractory monitoring and inspection with built-in measured data storage.
- Very robust aluminum die-cast housing for use rough environments
- Focusable precision optics for optimum adjustment even with very small spot sizes
- Large data storage capacity for subsequent analysis of measured data
- Integrated maximum value storage to determine the peak value in a series of measurements
- Fully digital signal processing, resulting in wider temperature ranges as well as higher accuracy
The USB interface permits the use of the optional analyzing software PortaWin. With this software the measured temperature data can be displayed and processed on a PC in real time or used for subsequent analysis.
- LumaSpection for Furnaces Thermal Imagers: Revolutionary design to continuously monitor through natural gas flames the internal furnace refractory and glass temperatures. A wide-angle, water-cooled and air-purged borescope lens penetrates through a port in the furnace side to provide an accurate high resolution thermal image of the interior. The solution includes a fail-safe auto retraction system.
- LumaSpection for Refractory Thermal Imagers: Refractory lined critical vessels in glass production plants operate at high temperatures and are at risk of failure as joints and refractory degrade. The LumaSpection for Refractory system is mounted external to the melt tank to provide real-time, non-contact thermal imaging for automated fault detection and monitoring for your more critical assets such furnaces and float tanks. An environmental housing is provided, and optional pan and tilt hardware.
- LumaSpec Software: Windows-Based Thermal Imaging Software that Offers High-Speed Real-Time Data Acquisition and Image Analysis Capabilities. Users can quickly validate theory, isolate areas of specific interest, or identify uses for monitoring and alerts.
- User defined regions of interest allow continuous trending and alarm generation for critical areas.
- Full image data analysis including profiles, histograms, 3-D rendering and image overlay.
- Integrate into plant control system via OPC or analog output options.
- Full image archiving capabilities.
- Allows secure remote monitoring through multiple terminals.
- Integrate multiple thermal imagers, pyrometers and other plant sensor data.
Direct, accurate measurement of the glass bulk temperature for improved control of the melting process.
Full thermal image profiles of the glass furnace to monitor & control firing profiles, and visualize furnace uniformity.
Improved monitoring of critical crown, bottom and side refractory components.
- Flexible monitoring of critical areas to avoid instability of ceiling and dangerous breakthroughs e.g. to the furnace walls
- Avoidance of costly loss production by optimal temperature monitoring of critical furnace areas
Increased lifetime, with minimal installation and maintenance required.